How to Configure LAN / Network Printer with MTA & EPOS
Setup LAN Printer with Full EPOS
- Insert Paper Roll and Turn on LAN Printer
- Connect the Wifi Router to LAN Printer using ETHERNET Cable
- Make sure to connect the LAN printer to the same wifi network as the EPOS
- Open terminal and connect to t2s server with clients VPN IP using ssh t2s@(ip adress) & enter the password 2success
- To identify IP of the LAN printer connected to the current network use the command sudo arp-scan -l this will display all device's IP address connected on the same network
- Search for the device names Seiko instruments
- Copy the IP Address from the left hand side of the identified device
- Go to admin panel using ./a
- Go to option number 8 Printer Configuration
- Select option 5.2 Install Seiko RP-D10 LAN
- Paste the copied IP address of the LAN printer in the input box and hit enter
- Place a test order and verify the prints
- For Printer Section settings on EPOS, go to Settings -> Printers -> Sections here you can dedicate the printers to specific sections of the menu as per client's requirements
Now your Network Printer is successfully configured with your EPOS
Setup LAN Printer with My Takeaway App / APOS / A920
- Insert Paper Roll and Turn on LAN Printer
- Connect the Wifi Router to LAN Printer using ETHERNET Cable
- Make sure to use the same Wifi Router Network to be connected to your Phone or APOS / A920
- On Your My Takeaway App (Phone / APOS / A920) Open My Takeaway App and click on the Hamburger icon on the top left corner
then select settings
- Select Store Settings from the menu and click on Printer
- Select Network Printer from the options and click "OK" to allow your My Takeaway App to scan for Printers
- The available printers on your network will be displayed, now select your desired printer from the list (Seiko instruments)
Now your Network Printer is successfully configured with your My Takeaway App / APOS / A920
Network Printers Recommended by Foodhub #1
Network Printers Recommended by Foodhub #2
Related Articles
EPOS Printer Troubleshooting
How to troubleshoot your EPOS Printer Make sure the cables are firmly connected Check the light status indicator Open terminal and connect to t2s server with clients VPN IP using ssh t2s@(ip adress) & enter the password 2success Enter the command ./a ...
How to Install Full EPOS System
How to Install Foodhub Full EPOS System Contents of the Package WonderPOS System 15inch Comet Caller ID Cable Bundle for WonderPOS Telephone Extension (10mm) Mains 4 Way Anti Surge Strip Telephone Splitter - 3 way LAN Cable 2M / 5M Seiko RP-F10 USB ...
Internet & Wifi Network Troubleshooting on FULL EPOS & Android POS
Network Issues on FULL EPOS Ensure Green & Amber lights on both the LAN ports where the ethernet is connected Ethernet cable must be connected only next to the VGA port under the EPOS Switch the Ethernet cable to a different port on the router & swap ...
Connecting your Mobile hotspot to EPOS
Mobile Hotspot with EPOS Turn on your hotspot - Android Swipe down from the top of the screen Turn on Mobile Hotspot or Go to Settings Connectivity / Network / Mobile Data, choose any of the options depending on your operating system turn on Mobile ...
Unable to connect to the Internet - EPOS
If a client complains of no internet connection on their EPOS, check the following connections, 1. Check how the device is connected to the Internet (LAN / WiFi adapter) 2. Check if the LAN cable is connected to the correct port. (The cable must be ...