How to Power Drain Your EPOS & APOS

• Related Articles

• EPOS - Sound Failure Troubleshooting

  How to troubleshoot Sound Failure on EPOS Power Drain the EPOS Open terminal and connect to t2s server with clients VPN IP using ssh t2s@(ip adress) & enter the password 2success Type the command sudo alsamixer and hit enter Increase volume as shown ...

• Internet & Wifi Network Troubleshooting on FULL EPOS & Android POS

  Network Issues on FULL EPOS Ensure Green & Amber lights on both the LAN ports where the ethernet is connected Ethernet cable must be connected only next to the VGA port under the EPOS Switch the Ethernet cable to a different port on the router & swap ...

• EPOS Printer Troubleshooting

  How to troubleshoot your EPOS Printer Make sure the cables are firmly connected Check the light status indicator Open terminal and connect to t2s server with clients VPN IP using ssh t2s@(ip adress) & enter the password 2success Enter the command ./a ...

• APOS Sound Failure Troubleshooting

  Sound Failure - APOS Turn Off The Device by holding power button and tapping on "Power Off" Remove the backdoor of the device Slide out the battery Press and hold the power button while the battery is out Place the battery back in and put the ...

• APOS / A920 Printer Failure

  Printer Failure - APOS Turn Off The Device by holding power button and tapping on "Power Off" Remove the backdoor of the device Slide out the battery Press and hold the power button while the battery is out Place the battery back in and put the ...