Connecting your Mobile hotspot to EPOS

Connecting your Mobile hotspot to EPOS

Mobile Hotspot with EPOS

Turn on your hotspot - Android

  1. Swipe down from the top of the screen
  2. Turn on Mobile Hotspot

    3. or

  3. Go to Settings
  4. Connectivity / Network / Mobile Data, choose any of the options depending on your operating system
  5. turn on Mobile hotspot & tethering

Turn on your hotspot - Apple iOS

  1. Go to Settings
  2. Personal hotspot
  3. turn it on

Connecting your phone to EPOS

  1. Connect your USB cable from your smartphone to EPOS
  2. Disconnect LAN / ETHERNET cable from your EPOS
  3. Make sure your mobile hostpot is on and Restart your EPOS
  4. However, The Hotspot may or may not work with all the EPOS devices as it is just a back up feature that could bridge the gap temporarily.

Your EPOS is now Successfully connected to your phone's internet.

    • Related Articles

    • Internet & Wifi Network Troubleshooting on FULL EPOS & Android POS

      Network Issues on FULL EPOS Ensure Green & Amber lights on both the LAN ports where the ethernet is connected Ethernet cable must be connected only next to the VGA port under the EPOS Switch the Ethernet cable to a different port on the router & swap ...

    • EPOS Printer Troubleshooting

      How to troubleshoot your EPOS Printer Make sure the cables are firmly connected Check the light status indicator Open terminal and connect to t2s server with clients VPN IP using ssh t2s@(ip adress) & enter the password 2success Enter the command ./a ...

    • Connecting Wifi dongle - Full EPOS with Fusion React

      Follow the below mentioned steps to connect WiFi dongle with POS > Check if the client received the WiFi dongle (This device will be black in colour) > Advise client to connect the device to his EPOS > Restart the system > Access MyPOS manager by ...

    • EPOS - Sound Failure Troubleshooting

      How to troubleshoot Sound Failure on EPOS Power Drain the EPOS Open terminal and connect to t2s server with clients VPN IP using ssh t2s@(ip adress) & enter the password 2success Type the command sudo alsamixer and hit enter Increase volume as shown ...

    • Setup FUSION LITE tablet with FULL EPOS

      Fusion Lite We would like to let you know that we are no longer continuing with our Fusion Lite Application as we all are aware that we have moved to React across all over our technologies We will be using the same My Takeaway App with Restaurant ...