RP 850 (Foodhub Printer)
Device Specification
Printer Type : USB & LAN
Till roll size : 80mm
This Printer can be configured as a LAN or a USB printer based on client's requirements.
Device Image
Keys & Indicators
Please reach out to the technical team in case of any queries/issues.
Related Articles
How to Configure LAN / Network Printer with MTA & EPOS
Setup LAN Printer with Full EPOS Insert Paper Roll and Turn on LAN Printer Connect the Wifi Router to LAN Printer using ETHERNET Cable Make sure to connect the LAN printer to the same wifi network as the EPOS Open terminal and connect to t2s server ...APOS / A920 Printer Failure
Printer Failure - APOS Turn Off The Device by holding power button and tapping on "Power Off" Remove the backdoor of the device Slide out the battery Press and hold the power button while the battery is out Place the battery back in and put the ...How to Troubleshoot MyPOS Printer
How to Troubleshoot MyPOS Printer Pull the trigger from the bottom and Open the MyPOS lid up Check for Foodhub / Thermal Paper Roll inside the Printer Pull Out the paper a little bit and close the Printer Try Swapping the paper to the other side as ...EPOS Printer Troubleshooting
How to troubleshoot your EPOS Printer Make sure the cables are firmly connected Check the light status indicator Open terminal and connect to t2s server with clients VPN IP using ssh t2s@(ip adress) & enter the password 2success Enter the command ./a ...Takeaway not listed on Foodhub Portal
If a takeaway is not listed on the Foodhub portal, check for the following details; 1. Food hygiene ratings - Food hygiene ratings must be minimum 1. Check this under Features > Food hygiene ratings. If the ratings are not found, update the same by ...