Seiko RPF10 - Device information and troubleshooting

Device Specification

‌Printer Type : USB & LAN

Till roll size : 80mm 

If the client uses a smaller till roll, update settings on EPOS under printer configuration. 

Device Image  

Ports

To identify the issue always check the printer light status first and proceed with appropriate troubleshooting steps.

Light Status & Resolution 

Please reach out to the technical team in case of any queries/issues.

• Related Articles

• Seiko RPD10 - Device information and troubleshooting

  Device Specification Printer Type: USB Till Roll Size: 80mm If the client uses a smaller till roll, update settings on EPOS under printer configuration. Device Image Ports To identify the issue always check the printer light status first and proceed ...

• Internet & Wifi Network Troubleshooting on FULL EPOS & Android POS

  Network Issues on FULL EPOS Ensure Green & Amber lights on both the LAN ports where the ethernet is connected Ethernet cable must be connected only next to the VGA port under the EPOS Switch the Ethernet cable to a different port on the router & swap ...

• APOS Sound Failure Troubleshooting

  Sound Failure - APOS Turn Off The Device by holding power button and tapping on "Power Off" Remove the backdoor of the device Slide out the battery Press and hold the power button while the battery is out Place the battery back in and put the ...

• Cash Draw Troubleshooting

  Cash Draw Troubleshooting Only the Cash Draw purchased from Foodhub is compatible with our Full EPOS Make sure the cash draw is connected to the Printer or EPOS and the same is toggled on Linux -> Cash Draw Tab -> Cash Drawer Connection Mode If the ...

• How to Assign a device to Teamviewer?

  Please follow the steps given below to assign the device to Teamviewer. Click on Apps icon on the top right corner of the screen. This will direct you to Foodhub App store. Scroll down and select Teamviewer. You will receive a prompt / Pop up "Assign ...