Wall mount Kiosk

Arranging electrical outlets

Mange 86-size three-hole power supply and network port socket according to the above dimensions.

Installing wall screws     

According to the dimensions, punch 3 holes in the wall 08x80 

Put in the Plastic expansion tube and install 3 M5 screws, reserved 3mm length. 

        

• Related Articles

• Configure PDQ - Adyen - Kiosk

  To integrate Adyen PDQ to the kiosk, please follow the below mentioned steps. Tap on the store name and id on the top right corner of the kiosk screen a few times. Enter the pin as 21220 On Kiosk settings menu, scroll down and tap on configured PDQ ...

• Show Default Images - Kiosk

  Please follow the below steps to enable default menu images on Kiosk. Open Kiosk application. Tap on the store id on top right corner a few times. Enter the Pin 21220 Scroll down and enable the “Show default Images” option. View the menu items. ...

• ‌Enable Cash - Kiosk

  Please follow the below steps to enable cash on Kiosk. Navigate to Settings. Tap on the store ID on top right corner a few times Enter the Pin as 21220 Scroll down and Enable the “Enable Cash” option. Perform a transaction and select “Pay at the ...

• Enable QR - Kiosk

  Please follow the below steps to enable card on Kiosk. Navigate to Settings. Tap on the store ID on top right corner a few times. Enter the Pin as 21220 Enable the “Enable QR” option. Perform a transaction and choose “Scan to pay”. (The app will ...

• My Kiosk isn't working!

  Follow the below mentioned troubleshooting steps based on the issue faced. ‌Touchscreen Failure Restart the Kiosk: Switch the power switch on and off to initiate a restart. Perform a power drain: Power off the device. Disconnect the power cable from ...